Upload a Blueprint to Ipad Apple Configurator 2

How to Enroll iOS devices using Apple Configurator

What is Apple Configurator ?

A pple Configurator is a costless utility tool provided past Apple that allows IT admins to hands configure, enroll, and deploy corporate iOS, iPadOS and tvOS devices in the enterprise through a USB connection. Apple Configurator aids in the automated bulk enrollment of Apple tree devices using MDM and pre-loading of these Apple devices with the associated profiles and distributed apps before handing them out to users.

Apple tree Configurator 2 is the latest version of this tool available that makes the deployment procedure of corporate iOS devices easier and more than efficient. You tin besides assign users to devices and supervise them, exercising additional control. Administrators can enforce mobile security on managed devices by importing existing profiles or creating new configuration profiles using Apple Configurator ii. You tin can use Apple Configurator 2 to enroll devices not purchased directly from Apple or its reseller with ABM as explained here.

Similarly, Mobile Device Managing director Plus also supports enrollment of Apple Boob tube using Apple Configurator ii. Follow the steps given here to acquire how to apply Apple Configurator ii to enroll Apple tree Tv.

Benefits of integrating MDM with Apple Configurator two

The benefits of using Apple Configurator 2 is mentioned below:

1. Button predefined configurations for corporate iOS devices.
2. Automatic enrollment with Mobile Device Manager Plus.
3. Enroll devices in majority.
4. Advanced control over the Supervised devices. For more details on Supervised devices and their benefits, refer this.

Nosotros have made your task simpler!

Larn how to set up Apple tree Configurator ii in just 3 minutes through this demo video.

How to enroll iOS devices using Apple Configurator?

Prerequisites for enrollment:

1. To utilize Apple Configurator two, ensure your Mac is running on 10.7 or subsequently versions of operating systems.
2. It is recommended to update your iTunes before installing the Apple Configurator Utility.
3. Apple tree Configurator with MDM can be used merely for devices running  iOS six or later on versions. If whatsoever device with lower versions is used, then the Operating System of the devices are automatically upgraded to the latest.

You tin use Apple Configurator to enroll multiple devices at the same time. Follow the steps mentioned below to enroll multiple devices using Apple Configurator.

1. Prepare Apple Configurator 2.0
2. Enroll Devices
3. Assign Users

Prepare Apple Configurator 2.0

After installing the Apple Configurator two, you have to follow the steps mentioned below to Prepare Apple Configurator 2.0:

1. On Apple Configurator two, click File, select New Profile and then select Wi-Fi. Do not modify any other profiles as this might affect the profiles distributed using MDM.
2. Create a Wi-Fi profile and save it.

   

3. Click File and choose New Blueprint and name it.

   

4. Open up the newly created Pattern and click Profiles, y'all have to add the newly created Wi-Fi contour (which was created in step #2).

   

5. Right-click and choose Ready equally shown in the beneath image.

   

6. Specify the Configuration Type as Transmission. If you lot wish to add mobile devices into your Apple tree Business organization Managing director (ABM) portal from Apple tree Configurator 2, enable the Add together to Apple School Manager or Apple Business concern Manager option. Learn how, from this document.

   

7. Add the new server details by specifying the Server Name and Enrollment URL. Enrollment URL, which is configured in the MDM server.

   

8. Trust anchor certificates are automatically added. If Apple Configurator takes also long to fetch anchor certificates, skip and proceed directly to the Assign to organisation step by clicking on Next.

   

   

9. Specify the name and details of the system by creating a new organization on Apple tree Configurator two.

   

10. Choose Generate a new supervision identity to create a new Supervision identity on Apple Configurator ii.

    

11. If you had enabled the option to add devices to DEP using Apple Configurator, enter your ABM account credentials

    

    

12. Configure iOS setup assistant by clicking Gear up.

    

13. One time the configuration on Apple Configurator 2 is done, connect the devices to a Mac through USB. Now in Apple tree Configurator, select the device, choose the created design and add it to the device to be enrolled. One time this is done, the device restarts and the process is completed by accepting the created contour in the device. Afterwards completion, the device gets added to the MDM Server from where the device can be assigned to the user.

Enroll Devices to the MDM server from Apple Configurator

In order to enroll devices, you have to specify the ME MDM server URL on Apple Configurator 2. Y'all can detect the URL, in the below-mentioned location:

1. On the MDM Product server console, cull Enrollment
2. Nether iOS choose Apple Configurator
3. Select Configuration Steps, navigate to the 5th slide and copy the URL.
4. On Apple Configurator ii, provide the URL which you have copied from the MDM server.

Assign Users

You can see all the devices are listed in the MDM server, under Apple Configurator. Y'all can assign the devices to advisable users. In one case the users are assigned, you lot can run across the devices listed nether Managed devices view on the MDM server.

Troubleshooting Tips

1. During device activation, you encounter the error A cloud configuration is already nowadays on this device [mctunnelerrordomain – 0x36b2 (14002)].

   Connect the device back to Apple Configurator. Right-click the device and select Restore. This re-downloads configurations into the device and fixes the problem.

2. While configuring the Blueprint on Apple tree Configurator, y'all are prompted to enter the Apple tree ID and password and y'all are unable to skip this step.

   This is a default screen which appears while configuring a Design. You cannot skip this step if you lot have enabled the pick to Add device to DEP portal in the beginning step. If you practice non want to add the devices to ABM, uncheck the pick and skip the pace requesting for Apple credentials. Else, enter the ABM portal details and click on Next.

3. When you choose Apply Configuration on Apple tree Configurator, you encounter a Session Time Out error.

   In this case, verify the Cyberspace connectivity and retry applying configuration on Apple Configurator.

4. While configuring the Blueprint, the screen gets stuck on Fetching Anchor Certificates or if the Certificates are non fetched

   You tin safely click on Side by side as this step does not affect the blueprint creation.

5. You are trying to enroll a device and become an unexpected fault with Failed to retrieve IMEI.

   This error occurs when the device is already enrolled with Apple Configurator or when you enroll unlike types of devices like iPhones and iPads consecutively using Apple Configurator. Since an iPhone has an IMEI number (which is required for enrollment in some cases), it is automatically detected and the enrollment is completed. Since an iPad does non have an IMEI number this fault is shown. Restore the device and try enrolling it again.
   NOTE: Sure iPads do accept the IMEI number while enrolling which this error does non occur.

6. You are trying to enroll a device and see the error The device does not recognize the host.

   This error occurs when the restriction Allow iTunes pairing and other USB connections accept been applied to the device. This restriction prevents the connection with all other devices except the one used for Supervising it. Remove the brake from the device or enroll using the motorcar previously used for Supervising the device.

7. If y'all are trying to enroll devices non purchased from Apple or authorized resellers.

   Apple at present allows adding ios 11 devices non purchased straight from Apple or authorized resellers into ABM. Follow the steps given hither to use Apple Configurator to add devices to ABM.

8. While enrolling a device yous encounter an error "An unexpected fault has occurred. Invalid Contour [MCProfileErrorDomain - 0x3E8 (1000) ]

   This error on Apple tree Configurator ii Invalid Contour [MCProfileErrorDomain - 0x3E8 (g) ] occurs if the device is currently enrolled in a dissimilar MDM solution. Remove the device from the MDM solution, mill reset, and endeavor enrolling the device once more to resolve the error Invalid Contour [MCProfileErrorDomain - 0x3E8 (1000) ].

9. If you're trying to add a device to DEP/ABM/ASM via Apple Configurator and receive the error An unexpected fault has occurred: The device returned an unexpected condition. (CommandFormatError) [com.apple tree.configurator.MobileDeviceKit.fault – 0xfffffffff8028014...]

   You might encounter the error 'The device returned an unexpected condition.' (CommandFormatError) [com.apple.configurator.MobileDeviceKit.fault – 0xfffffffff8028014...] This happens
   just if the device cannot be upgraded to iOS 11 (refer this to know the listing of iOS devices supporting iOS xi), or the device needs to exist upgraded to iOS 11 manually and and so added to DEP/ABM/ASM via Apple Configurator.

10. Unable to verify the server's enrollment URL. A server with the specified hostname could non be constitute.

    This message is shown on Apple Configurator when the MDM server is non reachable or the correct host URL is not entered. Verify if the MDM server, the Mac machine running Apple Configurator, and the devices to exist enrolled are in the same network. Also, ensure that the host URL which is available on the MDM server, is entered correctly.

11. While performing provisional enrollment of devices non purchased from authorised resellers, you receive the error Provisional enrollment failed: device is already in Device Enrollment Program.

    This error on Apple Configurator Provisional enrollment failed: device is already in Device Enrollment Programme occurs when the device yous are trying to enroll is already available in the ABM portal. Bank check if the device is available in the server titled Devices Added by Apple Configurator 2or is assigned to a dissimilar server in the ABM portal.

12. While performing conditional enrollment of devices not purchased from authorised resellers, you receive the mistake Provisional enrollment failed: Network error.

    This fault on Apple Configurator, Conditional enrollment failed: Network mistake occurs when the device you are trying to enroll is already available in the ABM portal. Cheque if the device is available in the server titled Devices Added by Apple Configurator two or is assigned to a unlike server in the ABM portal. If you lot are unable to observe the device, effort connecting to a different network to enroll the device.

13. While adding devices to the ABM portal via Apple Configurator yous encounter the fault 'Provisional enrollment failed... The Cloud configuration server is unavailable or busy [MCCloudConfigurationErrorDomain - 0x80EF (33007)]'.

    This error Provisional enrollment failed... The Cloud configuration server is unavailable or busy [MCCloudConfigurationErrorDomain - 0x80EF (33007)] is shown if the device is unable to contact the ABM server. Factory reset the device and keep until the Wi-Fi configuration stride. Ready the device using Apple Configurator and follow the steps for adding information technology to ABM.

14. Why are my devices not listed nether ABM tab when I add together the devices to ABM using Apple Configurator?

    When devices are enrolled to ABM using Apple Configurator, the devices will be initially listed under Apple Configurator tab even though they are added to the ABM portal. When the user consignment is complete, these devices volition exist moved to Managed devices tab.

15. While enrolling devices to the Device Enrollment Program or Apple Business Manager, you encounter an error Apple Configurator 2 cannot access the Device Enrollment Program

    You may encounter this error Apple Configurator 2 cannot access the Device Enrollment Program if there are network bug due to which https://mdmenrollment.apple tree.com is not reachable or when the Apple servers are downward. Verify your network connectivity and endeavor again after sometime

jacksonboloody.blogspot.com

Source: https://www.manageengine.com/mobile-device-management/help/enrollment/enroll_ios_devices_using_apple_configurator.html

Share this post